Ice Machine Overflowing in Midstream Ridge

The usual causes are inlet valve not closing, float or level probe scaled or stuck, blocked overflow or drain, incorrect water pressure to the machine. Which one applies is settled on site by measurement, not guesswork.

Same-day attendance applies to this fault. Midrand and Centurion sit on the route between the Johannesburg and Pretoria runs, so attendance windows here are usually the shortest available. Call 069 268 0988 for the next available slot.

Test inlet valve shut-off with power removed; Clean and test float or probe; Clear overflow and drain lines; Measure supply pressure; Check level control output.

Flake plant fails mechanically more often than refrigeration-wise: water seals, bearings and gearboxes are the parts that decide machine life. On flake ice machines in Midstream Ridge we see this fault regularly, usually alongside overdue descaling.

Ice Machine Servicing normally resolves it. Half a day per machine, including refill and a full production cycle.

Sometimes — where the fault is a water-side problem the machine can often be run on reduced output until parts arrive. Where a compressor or leak is involved we advise buying in bagged ice while the repair is completed.