Reyds.Heat pumps · Boilers · Steam

Commercial ice plant

Ice Machine Installation in Johannesburg & Gauteng

Supply and installation of commercial ice machines, bins and remote condensers.

Installation covers siting for condenser airflow and ambient, the potable water feed with filtration, a trapped gravity drain, electrical supply and commissioning against the rated output. Ambient and water temperature are the two figures that decide whether a machine ever meets its catalogue rating.

Turnaround
Typically one day for self-contained and modular plant; two to three with a remote condenser.
Areas covered
243 areas across Gauteng
Call
069 268 0988

What is included

Scope of work

  • Site survey, output sizing and siting
  • Water feed, filtration and softening
  • Trapped drain and waste arrangements
  • Electrical supply and isolation
  • Bin or dispenser assembly and levelling
  • Commissioning with recorded output and cube weight

Symptoms

When to call us

  • New kitchen, bar or clinic fit-out
  • Replacing a machine that never met demand
  • Relocating plant to improve ventilation

What we work on

Plant specification

Machine typesCube, half-dice, full-dice, flake, nugget, tube, block and gourmet ice
ConfigurationsSelf-contained undercounter, modular head on bin, remote condenser, split plant
Condenser typesAir-cooled, water-cooled and remote air-cooled
RefrigerantsR134a, R404A, R448A, R449A, R290 and R600a depending on model and age
Output range20 kg/24 h undercounter through to 1 000 kg+/24 h modular and flake plant
Water supplyPotable cold feed, typically 1–6 bar, with filtration and softening where hardness demands
Electrical230 V single phase on smaller plant; 400 V three phase on large modular and flake machines
ControlThermostatic or electronic harvest control, bin level probes and timed purge cycles
Common wear partsWater inlet valves, float valves, water pumps, spray bars, hot gas valves, contactors, fan motors
HygieneFood-contact sanitising of evaporator, chute, bin and water circuit at every service

Service areas

Ice Machine Installation by area

Also relevant

Other ice machine services

Ice Machine Repairs

Breakdown repair of commercial ice machines that have stopped producing or dropped output.

Ice Machine Servicing

Full service including descale, sanitise, refrigeration checks and output verification.

Ice Machine Maintenance Contracts

Planned maintenance with scheduled descaling, sanitising and filter changes.

Ice Machine Replacement

Repair-versus-replace assessment and like-for-like or upsized replacement.

Emergency Ice Machine Repairs

Same-day breakdown attendance where ice loss is stopping trade.

Ice Machine Descaling

Chemical descale of evaporator, sump, pump and water circuit.

Ice Machine Sanitising & Hygiene

Food-safe sanitising of evaporator, chute, bin and dispenser.

Ice Machine Water Filter Replacement

Filter and cartridge changes with hardness testing.

Ice Machine Compressor Replacement

Sealed-system compressor replacement with correct recharge.

Ice Machine Gas Refill & Leak Repair

Leak detection, repair and weighed refrigerant recharge.

Ice Machine Thermostat & Control Repairs

Harvest control, probe, timer and PCB fault repair.

Ice Machine Water Pump Repairs

Circulation pump, sump and spray bar repair.

Ice Machine Evaporator & Plate Repairs

Evaporator inspection, descale and plate replacement.

Ice Machine Condenser Cleaning

Air and water-cooled condenser cleaning and airflow correction.

Ice Machine Relocation

Safe decommission, move and recommission of ice plant.

Ice Bin & Dispenser Repairs

Storage bin, chute, gasket and dispenser repair.

Ice Machine Commissioning

Documented commissioning with measured output and cube weight.

Ice Machine Output Audit

Measured capacity audit against site peak demand.

Ice Machine Hygiene Compliance

HACCP-aligned hygiene programme and documentation for ice plant.

FAQs

Frequently asked questions

Do you attend ice machine installation in Johannesburg?

Yes. Johannesburg falls inside our standard Johannesburg coverage. Call-outs are run from the central Johannesburg base, which keeps attendance windows short for kitchens in the northern and central suburbs. Call 069 268 0988 to book an attendance slot.

How long does ice machine installation take?

Typically one day for self-contained and modular plant; two to three with a remote condenser.

Which machines do you work on in Johannesburg?

Everything from self-contained undercounter machines to modular heads on bins and production plant, including modular ice machines & bins, water-cooled ice machines, remote condenser ice machines. The installed base here runs from single undercounter bar machines through to modular hotel plant and flake counters, so the first job is establishing exactly what is installed and how hard it is worked.

Which brands are covered?

We service all common commercial makes, including SnoMaster, Hubbard, Electrolux Professional, Whirlpool Commercial, and can source the usual wear parts — inlet valves, float valves, pumps, spray bars, thermostats and fan motors.

What is included in the price?

The visit covers site survey, output sizing and siting, water feed, filtration and softening, trapped drain and waste arrangements and a written record of findings. Parts are quoted before fitting unless you have authorised a repair limit.

A related problem is "Noisy Ice Machine" — is that covered?

Grinding, knocking, squealing or rattling in operation. That is diagnosed on the same visit, and the fault page for Johannesburg sets out the usual causes and how we test for them.

Book ice machine installation

Attendance throughout Johannesburg, Ekurhuleni, West Rand, Midrand, Centurion and Pretoria.