Parkmore · Johannesburg

Ice Machine Installation in Parkmore

Ice Machine Installation in Parkmore, Johannesburg. Supply and installation of commercial ice machines, bins and remote condensers.

Installation covers siting for condenser airflow and ambient, the potable water feed with filtration, a trapped gravity drain, electrical supply and commissioning against the rated output. Ambient and water temperature are the two figures that decide whether a machine ever meets its catalogue rating.

The ice plant here is mostly estate clubhouses, guest houses, small restaurants and private bars, so the work is weighted towards undercounter and small modular machines. Call-outs are run from the central Johannesburg base, which keeps attendance windows short for kitchens in the northern and central suburbs.

Where a site is on borehole or stored water, hardness and sediment shorten descaling intervals sharply, which is why we take a hardness reading before setting a maintenance schedule. Peak demand normally lands in a two-hour service window, so storage volume matters as much as production per 24 hours.

012 546 6670 WhatsApp 069 268 0988 info@reyds.co.za

Area: Parkmore, Johannesburg
Turnaround: Typically one day for self-contained and modular plant; two to three with a remote condenser.
Call: 069 268 0988

Parkmore

Scope of work

Site survey, output sizing and siting
Water feed, filtration and softening
Trapped drain and waste arrangements
Electrical supply and isolation
Bin or dispenser assembly and levelling
Commissioning with recorded output and cube weight

When to call

Symptoms we see locally

New kitchen, bar or clinic fit-out
Replacing a machine that never met demand
Relocating plant to improve ventilation

Technical detail

Plant specification

Machine types	Cube, half-dice, full-dice, flake, nugget, tube, block and gourmet ice
Configurations	Self-contained undercounter, modular head on bin, remote condenser, split plant
Condenser types	Air-cooled, water-cooled and remote air-cooled
Refrigerants	R134a, R404A, R448A, R449A, R290 and R600a depending on model and age
Output range	20 kg/24 h undercounter through to 1 000 kg+/24 h modular and flake plant
Water supply	Potable cold feed, typically 1–6 bar, with filtration and softening where hardness demands
Electrical	230 V single phase on smaller plant; 400 V three phase on large modular and flake machines
Control	Thermostatic or electronic harvest control, bin level probes and timed purge cycles
Local context	Parkmore is a high-value residential pocket of Sandton, typically with multiple geysers or a heat pump on buffer storage, and in many cases pool or underfloor heating on the same plantroom.

Cube to block plant

Machine types serviced in Parkmore

Fault library

Faults we diagnose in Parkmore

Other ice machine services in Parkmore

Coverage

Nearby areas

FAQs

Frequently asked questions

Do you attend ice machine installation in Parkmore?

Yes. Parkmore falls inside our standard Johannesburg coverage. Call-outs are run from the central Johannesburg base, which keeps attendance windows short for kitchens in the northern and central suburbs. Call 069 268 0988 to book an attendance slot.

How long does ice machine installation take?

Typically one day for self-contained and modular plant; two to three with a remote condenser.

Which machines do you work on in Parkmore?

Everything from self-contained undercounter machines to modular heads on bins and production plant, including undercounter ice machines, modular ice machines & bins, water-cooled ice machines. The ice plant here is mostly estate clubhouses, guest houses, small restaurants and private bars, so the work is weighted towards undercounter and small modular machines.

Which brands are covered?

We service all common commercial makes, including Whirlpool Commercial, KTI-Plersch, Hoshizaki, Manitowoc, and can source the usual wear parts — inlet valves, float valves, pumps, spray bars, thermostats and fan motors.

What is included in the price?

The visit covers site survey, output sizing and siting, water feed, filtration and softening, trapped drain and waste arrangements and a written record of findings. Parts are quoted before fitting unless you have authorised a repair limit.

A related problem is "Cloudy or Hollow Ice Cubes" — is that covered?

Cubes are white, soft, hollow or misshapen. That is diagnosed on the same visit, and the fault page for Parkmore sets out the usual causes and how we test for them.

Ice Machine Installation in Parkmore

Parkmore falls inside our core northern-suburb route, so response is normally same-day for loss-of-hot-water call-outs.

012 546 6670 WhatsApp 069 268 0988 Request a quote