Kwikot Industrial Water Heater Thermostat Replacement in Roodepoort West

Yes. The KS100 500 L vessel is the most common unit we attend, and the same work applies to the 750 L, 1 000 L, 1 500 L, 2 000 L, 2 500 L and 3 000 L models in the range.

Control thermostat replacement, Over-temperature thermostat replacement, Pocket and capillary inspection, Setpoint and differential setting — with anything additional quoted before it is carried out.

Typically two to three hours per vessel.

Nominal recovery is about six hours from cold to 60 °C at rated electrical loading. If measured recovery is materially slower, the usual causes are scaled elements, a failed element on one phase, or a stepped control panel not bringing all stages in. Where a site runs on borehole water, hardness and iron content shorten service intervals considerably and are worth testing before setting a maintenance plan.

Yes. West Rand visits carry a fuller van stock because parts runs back to Johannesburg cost time. Compact plant repaired with off-the-shelf parts where possible. Call 069 268 0988.

Often, yes. Electrical loading can be increased inside panel and cabling limits, storage can be banked with a second vessel, and a heat pump can be added ahead of the cylinder to carry base load with the elements as backup.